July 10, 2020

Installing a Fin for an Inflatable Board with a Threaded Fin Box

FROM THE PAU HANA SUP SCHOOL

Step 1: Remove the plate from the fin hardware and keep it in your repair kit. It is not needed with a fin box that has threading.

Step 2: Insert the dowel in the large opening of the fin box and slide fin forward.

Step 3: Press the fin down in place. The hole will be lined up with the threading.

Step 4: Insert the thumb screw in the hole and screw into place until hand tight. Do not overtighten.

Step 5: When the Fin is removed store the Thumb Screw in the Repair Kit so it does not get lost.

To shop leashes and fins CLICK HERE.

Also in How To's

HOW TO: Set up the Calypso stand-up kayak

June 02, 2022

Learn how to install the window, fins and seat in this instructional video.

A man is paddling an inflatable stand-up paddle board

HOW TO KEEP YOUR PADDLEBOARD STRAIGHT

October 22, 2021

Unlock the secrets of straight-line paddling in SUP with our expert guide. Master foot positioning, stroke techniques, and core engagement to enhance your paddleboarding efficiency. Ideal for beginners, this guide helps you navigate waters with ease, reducing fatigue and maximizing enjoyment

HOW TO: Adjust the Aluminum SUP Paddle

April 16, 2021

An instructional guide on tightening the shaft clamp and adjusting the Aluminum SUP Paddle.

Follow

WHERE TO FIND US:

25570 RYE CANYON RD. UNIT I.

SANTA CLARITA,

CA 91355

Australia (USD $)

Canada (CAD $)

New Zealand (USD $)

United Kingdom (USD $)

United States (USD $)