1800-YAK-ROTOG-BLK
$26.00
| /
Paddle Holder for your SUP by YakAttack®. Use this holder for keeping your paddle secured to your paddle board when you are on the water. We find it best to use two of them to screw into your board. This avoids sliding, and will evenly distribute the weight of the paddle.
FEATURES:
* Tracking mounting plate not included
Alabama | 7-9 days
Alaska | 6-8 days
Arizona | 5-7 days
Arkansas | 7-9 days
California | 5-7 days
Colorado | 6-8 days
Connecticut | 8-11 days
Delaware | 7-9 days
Florida | 7-9 days
Georgia | 7-9 days
Hawaii | 6-8 days
Idaho | 6-8 days
Illinois | 7-9 days
Indiana | 7-9 days
Iowa | 7-9 days
Kansas | 7-9 days
Kentucky | 7-9 days
Louisiana | 7-9 days
Maine | 8-11 days
Maryland | 7-9 days
Massachusetts | 8-11 days
Michigan | 8-11 days
Minnesota | 8-11 days
Mississippi | 7-9 days
Missouri | 7-9 days
Montana | 7-9 days
Nebraska | 7-9 days
Nevada | 5-7 days
New Hampshire | 8-11 days
New Jersey | 7-9 days
New Mexico | 6-8 days
New York | 8-11 days
North Carolina | 8-11 days
North Dakota | 8-11 days
Ohio | 7-9 days
Oklahoma | 6-8 days
Oregon | 6-8 days
Pennsylvania | 7-9 days
Rhode Island | 8-11 days
South Carolina | 8-11 days
South Dakota | 7-9 days
Tennessee | 7-9 days
Texas | 7-9 days
Utah | 5-7 days
Vermont | 8-11 days
Virginia | 8-11 days
Washington | 6-8 days
West Virginia | 8-11 days
Wisconsin | 7-9 days
Wyoming | 6-8 days
Please note all days are in business days from the day after that the order is received by Pau Hana.
Prior to 2017, your D-Rings or other accessories may have rusted. Back then, they had dissimilar metals and so galvanic corrosion occurred quickly being in the saltwater aqueous solution. For D-Rings and all other like accessories in 2018 and beyond, this should not be a problem. To keep your D-Rings in good condition, see tips below!
1. Lightly coat any accessory that is going to go into the SeaMount® with a lightweight oil/WD-40 on the thread to make sure that the threads will continue to work well. This will prevent galvanic corrosion between dissimilar metals. This is especially important if you are planning on leaving accessories in your board for an extended period of time.
2. It is a good practice for people to take out any accessory and very importantly fin screws fairly often and to put on a light coat of oil/WD-40 on them again to make sure that the threads are still working.
3. Every metal part on accessories will eventually rust, but by oiling them this should greatly extend the life of the products along with the SeaMounts® themselves.
4. The stainless steel that we use in the SeaMount® is SUS304. What this means is that everything that is screwed into it should theoretically be that grade. Galvanic corrosion shouldn't be happening between different grades of stainless steel, but it is possible. So, if you want to buy a new screw for D-Rings, be sure to know the right grade of stainless steel to get.
5. Better yet, get your accessories from Pau Hana because we use similar metals in all accessories.
Alabama | 7-9 days
Alaska | 6-8 days
Arizona | 5-7 days
Arkansas | 7-9 days
California | 5-7 days
Colorado | 6-8 days
Connecticut | 8-11 days
Delaware | 7-9 days
Florida | 7-9 days
Georgia | 7-9 days
Hawaii | 6-8 days
Idaho | 6-8 days
Illinois | 7-9 days
Indiana | 7-9 days
Iowa | 7-9 days
Kansas | 7-9 days
Kentucky | 7-9 days
Louisiana | 7-9 days
Maine | 8-11 days
Maryland | 7-9 days
Massachusetts | 8-11 days
Michigan | 8-11 days
Minnesota | 8-11 days
Mississippi | 7-9 days
Missouri | 7-9 days
Montana | 7-9 days
Nebraska | 7-9 days
Nevada | 5-7 days
New Hampshire | 8-11 days
New Jersey | 7-9 days
New Mexico | 6-8 days
New York | 8-11 days
North Carolina | 8-11 days
North Dakota | 8-11 days
Ohio | 7-9 days
Oklahoma | 6-8 days
Oregon | 6-8 days
Pennsylvania | 7-9 days
Rhode Island | 8-11 days
South Carolina | 8-11 days
South Dakota | 7-9 days
Tennessee | 7-9 days
Texas | 7-9 days
Utah | 5-7 days
Vermont | 8-11 days
Virginia | 8-11 days
Washington | 6-8 days
West Virginia | 8-11 days
Wisconsin | 7-9 days
Wyoming | 6-8 days
Please note all days are in business days from the day after that the order is received by Pau Hana.
Prior to 2017, your D-Rings or other accessories may have rusted. Back then, they had dissimilar metals and so galvanic corrosion occurred quickly being in the saltwater aqueous solution. For D-Rings and all other like accessories in 2018 and beyond, this should not be a problem. To keep your D-Rings in good condition, see tips below!
1. Lightly coat any accessory that is going to go into the SeaMount® with a lightweight oil/WD-40 on the thread to make sure that the threads will continue to work well. This will prevent galvanic corrosion between dissimilar metals. This is especially important if you are planning on leaving accessories in your board for an extended period of time.
2. It is a good practice for people to take out any accessory and very importantly fin screws fairly often and to put on a light coat of oil/WD-40 on them again to make sure that the threads are still working.
3. Every metal part on accessories will eventually rust, but by oiling them this should greatly extend the life of the products along with the SeaMounts® themselves.
4. The stainless steel that we use in the SeaMount® is SUS304. What this means is that everything that is screwed into it should theoretically be that grade. Galvanic corrosion shouldn't be happening between different grades of stainless steel, but it is possible. So, if you want to buy a new screw for D-Rings, be sure to know the right grade of stainless steel to get.
5. Better yet, get your accessories from Pau Hana because we use similar metals in all accessories.
Alabama | 7-9 days
Alaska | 6-8 days
Arizona | 5-7 days
Arkansas | 7-9 days
California | 5-7 days
Colorado | 6-8 days
Connecticut | 8-11 days
Delaware | 7-9 days
Florida | 7-9 days
Georgia | 7-9 days
Hawaii | 6-8 days
Idaho | 6-8 days
Illinois | 7-9 days
Indiana | 7-9 days
Iowa | 7-9 days
Kansas | 7-9 days
Kentucky | 7-9 days
Louisiana | 7-9 days
Maine | 8-11 days
Maryland | 7-9 days
Massachusetts | 8-11 days
Michigan | 8-11 days
Minnesota | 8-11 days
Mississippi | 7-9 days
Missouri | 7-9 days
Montana | 7-9 days
Nebraska | 7-9 days
Nevada | 5-7 days
New Hampshire | 8-11 days
New Jersey | 7-9 days
New Mexico | 6-8 days
New York | 8-11 days
North Carolina | 8-11 days
North Dakota | 8-11 days
Ohio | 7-9 days
Oklahoma | 6-8 days
Oregon | 6-8 days
Pennsylvania | 7-9 days
Rhode Island | 8-11 days
South Carolina | 8-11 days
South Dakota | 7-9 days
Tennessee | 7-9 days
Texas | 7-9 days
Utah | 5-7 days
Vermont | 8-11 days
Virginia | 8-11 days
Washington | 6-8 days
West Virginia | 8-11 days
Wisconsin | 7-9 days
Wyoming | 6-8 days
Please note all days are in business days from the day after that the order is received by Pau Hana.
Prior to 2017, your D-Rings or other accessories may have rusted. Back then, they had dissimilar metals and so galvanic corrosion occurred quickly being in the saltwater aqueous solution. For D-Rings and all other like accessories in 2018 and beyond, this should not be a problem. To keep your D-Rings in good condition, see tips below!
1. Lightly coat any accessory that is going to go into the SeaMount® with a lightweight oil/WD-40 on the thread to make sure that the threads will continue to work well. This will prevent galvanic corrosion between dissimilar metals. This is especially important if you are planning on leaving accessories in your board for an extended period of time.
2. It is a good practice for people to take out any accessory and very importantly fin screws fairly often and to put on a light coat of oil/WD-40 on them again to make sure that the threads are still working.
3. Every metal part on accessories will eventually rust, but by oiling them this should greatly extend the life of the products along with the SeaMounts® themselves.
4. The stainless steel that we use in the SeaMount® is SUS304. What this means is that everything that is screwed into it should theoretically be that grade. Galvanic corrosion shouldn't be happening between different grades of stainless steel, but it is possible. So, if you want to buy a new screw for D-Rings, be sure to know the right grade of stainless steel to get.
5. Better yet, get your accessories from Pau Hana because we use similar metals in all accessories.
Be the first to ask a question about this.
