1801-SM-BSPT-BLK
$30.00
| /
Connect your RAM® accessories to the SeaMount® Base Plate to prolong the life of and maximize the protection of the SeaMount® plugs. You can attach up to four accessories into the Base Plate to provide the maximum support for your board. The Base Plate accepts accessories and RAM® balls with 5/16" or 1/4" x 20 size thread.
FEATURES:
Alabama | 7-9 days
Alaska | 6-8 days
Arizona | 5-7 days
Arkansas | 7-9 days
California | 5-7 days
Colorado | 6-8 days
Connecticut | 8-11 days
Delaware | 7-9 days
Florida | 7-9 days
Georgia | 7-9 days
Hawaii | 6-8 days
Idaho | 6-8 days
Illinois | 7-9 days
Indiana | 7-9 days
Iowa | 7-9 days
Kansas | 7-9 days
Kentucky | 7-9 days
Louisiana | 7-9 days
Maine | 8-11 days
Maryland | 7-9 days
Massachusetts | 8-11 days
Michigan | 8-11 days
Minnesota | 8-11 days
Mississippi | 7-9 days
Missouri | 7-9 days
Montana | 7-9 days
Nebraska | 7-9 days
Nevada | 5-7 days
New Hampshire | 8-11 days
New Jersey | 7-9 days
New Mexico | 6-8 days
New York | 8-11 days
North Carolina | 8-11 days
North Dakota | 8-11 days
Ohio | 7-9 days
Oklahoma | 6-8 days
Oregon | 6-8 days
Pennsylvania | 7-9 days
Rhode Island | 8-11 days
South Carolina | 8-11 days
South Dakota | 7-9 days
Tennessee | 7-9 days
Texas | 7-9 days
Utah | 5-7 days
Vermont | 8-11 days
Virginia | 8-11 days
Washington | 6-8 days
West Virginia | 8-11 days
Wisconsin | 7-9 days
Wyoming | 6-8 days
Please note all days are in business days from the day after that the order is received by Pau Hana.
To keep your D-Rings and other accessories in good condition, see tips below!
1. Lightly coat any accessory that is being screwed into the SeaMount® with a lightweight oil like WD-40 on the threads. This will prevent galvanic corrosion between dissimilar metals. This is especially important if you are planning on leaving accessories in your board for an extended period of time.
2. It is recommended to remove any accessory and fin hardware often and apply a light coat of oil like WD-40 on them again to make sure that the threads are lubricated. Rine the board, SeaMounts® with freshwater after every use especially after use in salt water.
3. Every metal part on accessories will eventually rust, but by oiling them this should greatly extend the life of the products along with the SeaMounts® themselves.
4. The stainless steel that we use in the SeaMount® is SUS304. What this means is that everything that is screwed into it should theoretically be that grade. Galvanic corrosion shouldn't be happening between different grades of stainless steel, but it is possible. So, if you want to buy a new screw for D-Rings, be sure to know the right grade of stainless steel to get.
5. Better yet, get your accessories from Pau Hana because we use similar metals in all accessories.
Does this include the screw to go into the seamounts on my board? Can I mount a ram ball directly to the seamount instead?
Yes, the Base Plate comes with the screw that screws into the Sea Mount. You do not want to screw a Ram Ball Directly into the board. When a rod holder or a cup holder is attached to a Ram Ball thats screwed directly into the board you can potentially break the Sea Mount or worse crack the board from a fall or other accident. That is why we designed the Base Plate to protect the board from damage caused by a fall or other accident.
