1801-SM-DRNG-BLK
$29.99
| /
These rugged SUP tie-down D-Rings easily screw into the SeaMount® plugs on the top of your SUP board. Set up the D-Rings at the front of your board and attach the bungee to hold small items for a day on the water. Or, use the cinch straps to attach larger items such as coolers and chairs to the middle or back of your board for extended paddling and fishing.
FEATURES:
Alabama | 7-9 days
Alaska | 6-8 days
Arizona | 5-7 days
Arkansas | 7-9 days
California | 5-7 days
Colorado | 6-8 days
Connecticut | 8-11 days
Delaware | 7-9 days
Florida | 7-9 days
Georgia | 7-9 days
Hawaii | 6-8 days
Idaho | 6-8 days
Illinois | 7-9 days
Indiana | 7-9 days
Iowa | 7-9 days
Kansas | 7-9 days
Kentucky | 7-9 days
Louisiana | 7-9 days
Maine | 8-11 days
Maryland | 7-9 days
Massachusetts | 8-11 days
Michigan | 8-11 days
Minnesota | 8-11 days
Mississippi | 7-9 days
Missouri | 7-9 days
Montana | 7-9 days
Nebraska | 7-9 days
Nevada | 5-7 days
New Hampshire | 8-11 days
New Jersey | 7-9 days
New Mexico | 6-8 days
New York | 8-11 days
North Carolina | 8-11 days
North Dakota | 8-11 days
Ohio | 7-9 days
Oklahoma | 6-8 days
Oregon | 6-8 days
Pennsylvania | 7-9 days
Rhode Island | 8-11 days
South Carolina | 8-11 days
South Dakota | 7-9 days
Tennessee | 7-9 days
Texas | 7-9 days
Utah | 5-7 days
Vermont | 8-11 days
Virginia | 8-11 days
Washington | 6-8 days
West Virginia | 8-11 days
Wisconsin | 7-9 days
Wyoming | 6-8 days
Please note all days are in business days from the day after that the order is received by Pau Hana.
To keep your D-Rings and other accessories in good condition, see tips below!
1. Lightly coat any accessory that is being screwed into the SeaMount® with a lightweight oil like WD-40 on the threads. This will prevent galvanic corrosion between dissimilar metals. This is especially important if you are planning on leaving accessories in your board for an extended period of time.
2. It is recommended to remove any accessory and fin hardware often and apply a light coat of oil like WD-40 on them again to make sure that the threads are lubricated. Rine the board, SeaMounts® with freshwater after every use especially after use in salt water.
3. Every metal part on accessories will eventually rust, but by oiling them this should greatly extend the life of the products along with the SeaMounts® themselves.
4. The stainless steel that we use in the SeaMount® is SUS304. What this means is that everything that is screwed into it should theoretically be that grade. Galvanic corrosion shouldn't be happening between different grades of stainless steel, but it is possible. So, if you want to buy a new screw for D-Rings, be sure to know the right grade of stainless steel to get.
5. Better yet, get your accessories from Pau Hana because we use similar metals in all accessories.
Does this need to have baseplate before installing?
No, the D-Rings screw directly into the Sea Mounts on the board.
